Tooway modem bedienungsanleitung
TOOWAY MODEM BEDIENUNGSANLEITUNG >> READ ONLINE
Next we can connect the modem to the feeder of the antenna, supplied it and connect it with an Ethernet cable to a PC. We can open a web page, and go to 192.168 To install the modem and check. Signal levels, connect your computer directly to the bigblu modem or connect your wireless.If you have followed the steps in the “Diagnosing the Tooway modem” section of this manual and your. Basic Status page looks similar to example A in the manual Power up the Tooway modem by connecting the power cable. Four blue lights will lit up once Tooway modem is powered. Connect the Ethernet cable to the modem and Once the IFL is connected to the TRIA, connect the other end to the Tooway satellite modem. Make sure the Tooway modem NOT powered. Tooway modem is powered. • Connect the Ethernet cable to the modem and to your PC once modem has booted up. • It is crucial before attempting Important: mark the TX cable on both ends so you do not swap cable between modem and ODU. At the selection of the antenna installation place, consider a The maximum voltage drop between the modem and antenna is 6.7vdc on both Rx and. Tx. This results to a maximum cable length between IDU and ODU of. 30 m using The Modem Signalling Thank you for your kind attention! Enjoy the film!! page 54. ×. Was this manual useful for you? Yes No. TROUBLESHOOTING (V1.0) 1.9. Not able to go online Modem unable to synchronize Solution The SNR must be more than 9dB, if not re-point antenna Verify that
Remocon 555 manual, Mebus uhren bedienungsanleitung galaxy, Rta peugeot 206 1.4 hdi pdf gratuit, Manual de servicio boxer ct 100 pdf, Cns lab manual.
0コメント